initial commit

project/inc/at32f425_conf.h

@@ -0,0 +1,147 @@
+/* add user code begin Header */
+/**
+  **************************************************************************
+  * @file     at32f425_conf.h
+  * @brief    at32f425 config header file
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+/* add user code end Header */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F425_CONF_H
+#define __AT32F425_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+  * @brief in the following line adjust the value of high speed external crystal (hext)
+  * used in your application
+  *
+  * tip: to avoid modifying this file each time you need to use different hext, you
+  *      can define the hext value in your toolchain compiler preprocessor.
+  *
+  */
+#if !defined  HEXT_VALUE
+#define HEXT_VALUE               ((uint32_t)16000000) /*!< value of the high speed external crystal in hz */
+#endif
+
+/**
+  * @brief in the following line adjust the high speed external crystal (hext) startup
+  * timeout value
+  */
+#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE               ((uint32_t)32768)   /*!< value of the low speed external clock in hz */
+
+/* module define -------------------------------------------------------------*/
+/*#define ACC_MODULE_ENABLED----------------------*/
+#define CRM_MODULE_ENABLED
+#define TMR_MODULE_ENABLED
+/*#define ERTC_MODULE_ENABLED---------------------*/
+#define GPIO_MODULE_ENABLED
+/*#define I2C_MODULE_ENABLED----------------------*/
+#define CAN_MODULE_ENABLED
+/*#define USB_MODULE_ENABLED----------------------*/
+#define USART_MODULE_ENABLED
+#define PWC_MODULE_ENABLED
+/*#define ADC_MODULE_ENABLED----------------------*/
+/*#define SPI_MODULE_ENABLED----------------------*/
+/*#define DMA_MODULE_ENABLED----------------------*/
+#define DEBUG_MODULE_ENABLED
+#define FLASH_MODULE_ENABLED
+/*#define CRC_MODULE_ENABLED----------------------*/
+/*#define WWDT_MODULE_ENABLED---------------------*/
+/*#define WDT_MODULE_ENABLED----------------------*/
+/*#define EXINT_MODULE_ENABLED--------------------*/
+#define MISC_MODULE_ENABLED
+/*#define SCFG_MODULE_ENABLED---------------------*/
+
+/* includes ------------------------------------------------------------------*/
+#ifdef ACC_MODULE_ENABLED
+#include "at32f425_acc.h"
+#endif
+#ifdef CRM_MODULE_ENABLED
+#include "at32f425_crm.h"
+#endif
+#ifdef CAN_MODULE_ENABLED
+#include "at32f425_can.h"
+#endif
+#ifdef USB_MODULE_ENABLED
+#include "at32f425_usb.h"
+#endif
+#ifdef TMR_MODULE_ENABLED
+#include "at32f425_tmr.h"
+#endif
+#ifdef ERTC_MODULE_ENABLED
+#include "at32f425_ertc.h"
+#endif
+#ifdef GPIO_MODULE_ENABLED
+#include "at32f425_gpio.h"
+#endif
+#ifdef I2C_MODULE_ENABLED
+#include "at32f425_i2c.h"
+#endif
+#ifdef USART_MODULE_ENABLED
+#include "at32f425_usart.h"
+#endif
+#ifdef PWC_MODULE_ENABLED
+#include "at32f425_pwc.h"
+#endif
+#ifdef ADC_MODULE_ENABLED
+#include "at32f425_adc.h"
+#endif
+#ifdef SPI_MODULE_ENABLED
+#include "at32f425_spi.h"
+#endif
+#ifdef DMA_MODULE_ENABLED
+#include "at32f425_dma.h"
+#endif
+#ifdef DEBUG_MODULE_ENABLED
+#include "at32f425_debug.h"
+#endif
+#ifdef FLASH_MODULE_ENABLED
+#include "at32f425_flash.h"
+#endif
+#ifdef CRC_MODULE_ENABLED
+#include "at32f425_crc.h"
+#endif
+#ifdef WWDT_MODULE_ENABLED
+#include "at32f425_wwdt.h"
+#endif
+#ifdef WDT_MODULE_ENABLED
+#include "at32f425_wdt.h"
+#endif
+#ifdef EXINT_MODULE_ENABLED
+#include "at32f425_exint.h"
+#endif
+#ifdef MISC_MODULE_ENABLED
+#include "at32f425_misc.h"
+#endif
+#ifdef SCFG_MODULE_ENABLED
+#include "at32f425_scfg.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif