btl143/BC4D-firmware
4
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

feat: 增加置物平台接口

Browse Source
This commit is contained in:
bmy
2024-06-10 16:56:04 +08:00
parent f9a87063d8
commit 1aa5b84322
3 changed files with 46 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

56
app/by_servo.c
View File

@@ -17,11 +17,11 @@ void by_servo_set_claw_arm(int16_t angle)
if (angle < 0) {
angle = 0;
} else if (angle > 180) {
angle = 180;
} else if (angle > 270) {
angle = 270;
}
ch_val = (uint32_t)(((float)angle / 180.0f * (PULSE_WIDTH_MAX - PULSE_WIDTH_MIN) + PULSE_WIDTH_MIN) / 20.0f * 9999.0f);
ch_val = (uint32_t)(((float)angle / 270.0f * (PULSE_WIDTH_MAX - PULSE_WIDTH_MIN) + PULSE_WIDTH_MIN) / 20.0f * 9999.0f);
tmr_channel_value_set(TMR1, TMR_SELECT_CHANNEL_2, ch_val);
@@ -36,7 +36,7 @@ void by_servo_set_claw_arm(int16_t angle)
*/
void by_servo_set_claw(int16_t angle)
{
#define PULSE_WIDTH_MIN 1.5f
#define PULSE_WIDTH_MIN 0.5f
#define PULSE_WIDTH_MAX 2.5f
uint32_t ch_val = 0;
@@ -62,18 +62,18 @@ void by_servo_set_claw(int16_t angle)
*/
void by_servo_set_camera(int16_t angle)
{
#define PULSE_WIDTH_MIN 1.5f
#define PULSE_WIDTH_MIN 0.5f
#define PULSE_WIDTH_MAX 2.5f
uint32_t ch_val = 0;
if (angle < 0) {
angle = 0;
} else if (angle > 180) {
angle = 180;
} else if (angle > 270) {
angle = 270;
}
ch_val = (uint32_t)(((float)angle / 180.0f * (PULSE_WIDTH_MAX - PULSE_WIDTH_MIN) + PULSE_WIDTH_MIN) / 20.0f * 9999.0f);
ch_val = (uint32_t)(((float)angle / 270.0f * (PULSE_WIDTH_MAX - PULSE_WIDTH_MIN) + PULSE_WIDTH_MIN) / 20.0f * 9999.0f);
tmr_channel_value_set(TMR3, TMR_SELECT_CHANNEL_4, ch_val);
@@ -82,13 +82,13 @@ void by_servo_set_camera(int16_t angle)
}
/**
* @brief 设置云台摇臂
* @brief 设置顶端抓取机构
*
* @param angle 角度 (0-180)
*/
void by_servo_set_scoop(int16_t angle)
{
#define PULSE_WIDTH_MIN 1.5f
#define PULSE_WIDTH_MIN 0.5f
#define PULSE_WIDTH_MAX 2.5f
uint32_t ch_val = 0;
@@ -107,13 +107,40 @@ void by_servo_set_scoop(int16_t angle)
#undef PULSE_WIDTH_MAX
}
/**
* @brief 设置置物平台
*
* @param angle 角度 (0-180)
*/
void by_servo_set_storage(int16_t angle)
{
#define PULSE_WIDTH_MIN 0.5f
#define PULSE_WIDTH_MAX 2.5f
uint32_t ch_val = 0;
if (angle < 0) {
angle = 0;
} else if (angle > 180) {
angle = 180;
}
ch_val = (uint32_t)(((float)angle / 180.0f * (PULSE_WIDTH_MAX - PULSE_WIDTH_MIN) + PULSE_WIDTH_MIN) / 20.0f * 9999.0f);
tmr_channel_value_set(TMR3, TMR_SELECT_CHANNEL_2, ch_val);
#undef PULSE_WIDTH_MIN
#undef PULSE_WIDTH_MAX
}
void by_servo_init(void)
{
// 后续要不全初始化为空值，由主控按顺序初始化
by_servo_set_claw_arm(0);
by_servo_set_claw(0);
by_servo_set_camera(0);
by_servo_set_claw_arm(220); // 36-220
by_servo_set_claw(25); // 25-90
by_servo_set_camera(45);
by_servo_set_scoop(0);
by_servo_set_storage(0);
}
void by_servo_can_handle(uint16_t stdd_id, const uint8_t *data, uint8_t len)
@@ -136,6 +163,9 @@ void by_servo_can_handle(uint16_t stdd_id, const uint8_t *data, uint8_t len)
case 0x00C:
by_servo_set_scoop(angle);
break;
case 0x00D:
by_servo_set_storage(angle);
break;
default:
break;
}

1
app/by_servo.h
View File

@@ -7,6 +7,7 @@ extern void by_servo_set_claw_arm(int16_t angle);
extern void by_servo_set_claw(int16_t angle);
extern void by_servo_set_camera(int16_t angle);
extern void by_servo_set_scoop(int16_t angle);
extern void by_servo_set_storage(int16_t angle);
extern void by_servo_init(void);
extern void by_servo_can_handle(uint16_t stdd_id, const uint8_t *data, uint8_t len);

4
project/src/main.c
View File

@@ -71,7 +71,7 @@
int main(void)
{
/* add user code begin 1 */
by_debug_init();
/* add user code end 1 */
/* system clock config. */
@@ -108,7 +108,7 @@ int main(void)
while (1) {
gpio_bits_write(GPIOA, GPIO_PINS_10, !gpio_output_data_bit_read(GPIOA, GPIO_PINS_10));
delay_ms(1000);
delay_ms(500);
/* add user code end 3 */
}
}